NanoVNA-F V2 SAA2 | HF/VHF/UHF Antenna Analyzer | Simple RF Vector Network Analyzer

NanoVNA-F V2 portable vector network analyzer is a new product developed on the basis of NanoVNA-F. It uses a 4.3-inch IPS LCD display and an aluminum alloy case. It is equipped with a 5000mAh large-capacity lithium battery as standard. Support touching screen and side button operation, support Chinese and English interface. The design of this product is based on edy555’s NanoVNA and OwOcomm’s S-A-A V2, and deep optimization of the software is made on the basis of the previous product NanoVNA-F. The operation interface is compatible with NanoVNA-F, the measurement ranges is extended to 3GHz, and the dynamic ranges is larger. The measurement is more accurate and the operation is more convenient.

Click me to download manual, firmware and other utilities.

Features:

• 4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes.
• All aluminum alloy case, sturdy and durable, effectively shielding electromagnetic interference to ensure measurement accuracy.
• with SMA port, easy to be converted to other RF ports.
• Touching screen design, with 3 side buttons at the same time, operating could be easy and simple.
• Support screen brightness adjustment.
• Easy firmware upgrade, no other tools needed.
• Supplied with high quality calibration parts and RG405 phase-stable cable to ensure calibration accuracy.
• Standard USB port desgin, could be charged with any USB wall charger.
• Various PC software available, all open source.
• Support various RF measurements, like S parameters, VSWR, Smith chart, phase, group delay, etc.

Specifications:

• Enclosure: Aluminum Alloy (case)
• Color: Black
• Battery: 1 * Lithium Battery with 5000mAh Inside
• Frequency: 50kHz-3GHz
• RF Output Power: -9dBm (error within 1GHz: ±1dB)
• Frequency Accuracy: <0.5ppm
• S21 Dynamic Ranges: 70dB (1.5GHz), 60dB (3GHz)
• S11 Dynamic Ranges: 50dB (1.5GHz), 40dB (3GHz)
• 2-port Return Loss: 20dB typ (1.5GHz), 13dB min (3GHz)
• Number of Calibration Points: 101 points
• Number of Sweeping Points: 101 points
• Number of Traces: 4
• Number of Mark Points: 4 (Moveable on screen)
• USB Interface: USB Type-C with CDC (serial)
• Group Saving: 5 Groups
• Sweep Time: about 1.9s/once (50kHz~3000MHz)
• Item Size: 140 * 73 * 20mm / 5.5 * 2.9 * 0.8in
• Item Weight: 270g / 9.5ounce
• Packing Size: 250 * 150 * 50mm / 9.8 * 5.9 * 2.0in
• Packing Weight: 500g / 1.1lb

Packing List:

1. NanoVNA x 1
2. SMA Open Calibration Kit x 1
3. SMA Short-circuit Calibration Kit x 1
4. SMA 50Ω Load Calibration Kit x 1
5. SMA-KK Double-Head Female Hole Adapter x 1
6. SMA-JJ Double-Head Male Pin Adapter x 1
7. SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter x 1
8. 200mm SMA-JJ RG405 RF Cable x 1
9. USB Type-C Data Cable x 1
10. Stylus x 1